EasyManuals Logo

Tenda AC23 User Manual

Tenda AC23
196 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #113 background imageLoading...
Page #113 background image
104
Configure IPv6 tunnel
Devices at both ends of the tunnel must support the dual stack protocol.
The WAN IPv4 address of the routers must be a public IP address.
6in4 tunnel
Log in to the web UI of the router, and navigate to IPv6. Set the connection type to 6in4 Tunnel,
enter required parameters and save the configurations.
Parameter description
Parameter
Description
Remote IPv4 Address
It specifies the WAN IPv4 address of the dual stack router at the peer side.
Local IPv6 Address
It specifies the IPv6 address of the LAN, which needs to be customized.
6to4 tunnel
Log in to the web UI of the router, and navigate to IPv6. Set the connection type to 6to4 Tunnel
and save the configurations.
6rd tunnel
Log in to the web UI of the router, and navigate to IPv6. Set the connection type to 6rd Tunnel,
enter required parameters and save the configurations.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Tenda AC23 and is the answer not in the manual?

Tenda AC23 Specifications

General IconGeneral
USB portNo
DC-in jackYes
Connectivity technologyWireless
Ethernet LAN (RJ-45) ports3
Product typeTabletop router
Product colorBlack
LED indicatorsLAN, System, WAN, WLAN, WPS
Wi-Fi bandDual-band (2.4 GHz / 5 GHz)
Wi-Fi standards802.11a, 802.11b, 802.11g, Wi-Fi 4 (802.11n), Wi-Fi 5 (802.11ac)
Top Wi-Fi standardWi-Fi 5 (802.11ac)
WLAN data transfer rate (max)2033 Mbit/s
WLAN data transfer rate (first band)300 Mbit/s
WLAN data transfer rate (second band)1733 Mbit/s
VPN supportIPsec, L2TP, PPTP
Networking standardsIEEE 802.11a, IEEE 802.11ac, IEEE 802.11b, IEEE 802.11g, IEEE 802.11n, IEEE 802.3, IEEE 802.3ab, IEEE 802.3u
Ethernet LAN data rates10, 100, 1000 Mbit/s
Ethernet LAN interface typeGigabit Ethernet
Transmit power20/23 dBmW
Antennas quantity7
Antenna gain level (max)6 dBi
Output current1.5 A
Output voltage12 V
AC input voltage100 - 240 V
Power source typeAC
AC input frequency50 - 60 Hz
CertificationCE/FCC/RoHS
Processor cores2
Processor frequency1000 MHz
Cables includedLAN (RJ-45)
Storage temperature (T-T)-40 - 70 °C
Operating temperature (T-T)0 - 40 °C
Storage relative humidity (H-H)5 - 90 %
Operating relative humidity (H-H)10 - 90 %
Security algorithmsWPA, WPA-PSK, WPA2, WPA2-PSK
Harmonized System (HS) code85176990
Weight and Dimensions IconWeight and Dimensions
Depth144.3 mm
Width238.9 mm
Height40.3 mm

Related product manuals