Internet
Setup
4. Select LOID, SN or SLID according to the authentication type provided by your ISP, enter
relevant information in the corresponding field and click OK. Screen below displays the
Authenticated status.
Tips:
1. Three authentication types are available here: LOID, SN and SLID. Please select the
corresponding authentication type according to Internet setup information provided by your ISP.
For specific configuration steps, see 1. Internet Setup.
2. When the authentication status displays Authenticated and the PON LED lights up, it indicates
the device has been registered successfully (You can also go to the System Status page to view the
ONU register status.). For surfing the Internet via the GPON, continue to finish your dial-up
connection settings (see Step 3: Dial up to Connect to the Internet).
To Next Page
Loading...