Function
Brief
3.3 Device Manage
Device Reboot
When some settings are not activated or there goes something wrong with your device, you can
reboot your device.
Configuration Steps:
❶ Click Reboot;
❷ Click OK on the pop-up dialogue box.
Restore Default Factory
When you cannot access the Internet and you cannot locate where the problem is, you can restore
your device to factory default settings.
Tips:
1. Restoring your device to factory defaults will clear all your previous settings. After resetting
your device, you need to re-configure your device. Do not restore your device to factory defaults
unless necessary.
2. Do verify that power is delivered normally on your device.
Configuration Steps:
❶ Click Reset;
❷ Click OK on the pop-up dialogue box.
Logs
If you want to view the operation of your system or you need to send your system logs to our
technical staff when you are running into problems, click Download and then follow onscreen
To Next Page
Loading...