Tenda G103 - Device Management and Operations

Function
Brief
28
ONU Register
Status
Display this device’s current register status. When Registered is
displayed, it means you can dial up to connect to the Internet.
ONU ID Display the ONU ID, i.e., ONU ID distributed by OLT.
Laser Pulse
Display this device’s laser status.
 Auto: Normal (Burst)
 Always be luminous: If light is being emitted, malfunction
occurs.
Optical Power
Transmitted
Display this device’s transmitting optical power (normal range: 0.5 ~
+5dBm).
Optical Power
Received
Display this device’s receiving optical power (normal range: -8 ~
-28dBm).
3. Device Management
This section is used for some system settings and system maintenance. The following parts are
included:
Change Login Password: For the sake of your device, you’d better change the login
password.
Login IP Config: Used for modifying this device’s login IP address.
Device Manage: Used for restarting, resetting, upgrading your device and exporting system
logs, etc.
Click Device Management to enter screen below: