12
Web management
Activate
These series of NVRs can be managed on the web UI.
If the NVR is not activated, you can activate it through the web UI. When the activation is
completed, you need to log in again.
Connect the computer to the switch or router that is connected to the NVR.
Set the IP address of the computer to an unused one belonging to the same network
segment as the IP address of the NVR but different from the IP address of the NVR.
The default login IP address of the NVR is 192�168�1�254, please set the IP address of
the computer to192.168.1.X (X indicates 2 to 253, and is unused by other devices).
101168192
2552 55 2550
To Next Page
Loading...
Need help?
General
