15
App management
After the cloud service of the NVR is enabled and the cloud status is Online, you can add
and manage the NVR through the TDSEE App.
Download the TDSEE App.
After the mobile phone is connected to the internet successfully, download and install
the TDSEE App onto your mobile phone by scanning the QR code or by searching for
TDSEE in the Google Play or App Store.
Ensure that the NVR is powered on and working properly.
Run the TDSEE App and follow the instructions to complete user registration. Enter the
Home page, then tap Add a device or in the upper right corner of the home page.
Scan the QR code on the label at the bottom of the NVR or scan the QR code on the
Cloud Service page, then follow the instructions in the App.
After the NVR is added, you can remotely preview real-time videos, play back the
recordings and check alarm messages through the TDSEE App.
QR Code
TDSEE
Or
Tips
To ensure that the login password of the NVR can be reset through the TDSEE App, please
register using the email address you used to activate the NVR.
To Next Page
Loading...
Need help?
General
