6
2
Install the camera
Remove the base
Fix the camera
Rotate the body of the camera, align the housing slot with any base notch, and then use a
screwdriver to pry the housing at the slot to remove the base.
The camera supports ceiling and wall mounting. The ceiling mounting is taken as an
example here.
Tips
− Please make sure the wall or the ceiling is strong enough to withstand three times the weight
of the camera.
− You may need to prepare a hammer drill, a drill bit, a rubber hammer, a screwdriver, and a
ladder for the installation.
Base notch
Housing slot
Mounting template
Anchor
To Next Page
Loading...
Need help?
General
