Document Version: V1.3
110
This function is disabled by default. When it is enabled, the page is shown as below.
Parameter & button description
Specifies the channel chosen to set the schedule.
Specifies whether the motion detection function is enabled.
Specifies the detection type.
By default, the movement of all objects is detected. After Human
Detection is enabled, the system will generate an alarm only when a
human is detected.
After the Human Detection function is enabled, some models do not
support custom the monitoring area.
Specifies the detection sensitivity threshold that triggers an alarm.
The larger the value, the easier it is to trigger an alarm.
Used to set all areas as the detection area with one click.
Used to clear the current detection area.
To Next Page
Loading...
