Tenda K4P-4TR - General Operation; Logout; Reboot

Document Version: V1.3
20
4.3 General Operation
4.3.1 Logout
The system will exit from the current operation menu to the live view screen after you log out.
When you re-enter the settings page, the user name and password need to be verified.
Step 1 Connect the mouse and monitor to the NVR.
Step 2
Click in the upper-right corner on the GUI of the NVR (to exit the full-screen
interface), click Log Out , and then click OK.
---End
4.3.2 Reboot
Step 1 Connect the mouse and monitor to the NVR.
Step 2
Click in the upper-right corner on the GUI of the NVR (to exit the full-screen
interface), click Reboot , and then click OK.
---End