Document Version: V1.3
9
Step 4 Ensure that the connection status is Connected, and enable the Auto add LAN cameras
function as required.
- If you want to automatically add the camera on the LAN port of the NVR, click Next,
and go to Step 6.
- If you want to manually add the camera on the LAN port of the NVR, disable the Auto
add LAN cameras function, then click Next.
If the connection status is Disconnected, try the following solutions:
Ensure that the LAN port of the NVR is connected properly.
Ensure that the router to which the NVR is connected has enabled the DHCP server
function.
To Next Page
Loading...
