Specifies the alarm method of the NVR after an alarm is
triggered.
- Single Screen Display: The alarm channel is displayed on a
single screen on the Live View page after an alarm is
triggered.
- Send Email: The system will send an alarm email to the
preset receiver email after an alarm is triggered. You need
to set the relevant parameters of email for this alarm
method to take effect. Refer to Email Configuration for
details.
- Message Notification: The system will send an alarm
notification to TDSEE App after an alarm is triggered. The
NVR needs to be added successfully through TDSEE App.
Refer to Manage the NVR through TDSEE App for details.
Sound & Light Alarm
Navigate to Configuration > Alarm > Sound & Light Alarm.
The sound & light alarm function refers to the audio and lighting alarm method of the camera. The
camera will sound or flash the fill light after an alarm is triggered.
Some descriptions of parameters and functions are as follows. Refer to Sound & Light Alarm for
details.
To Next Page
Loading...
