Document Version: V1.3
60
Procedure:
Step 1 Log in to the GUI of the NVR.
Step 2 Navigate to Playback > Channel.
Step 3 Tick D1.
Step 4 Select the date, which is October 30, 2021 in this example.
Step 5
Left-click the time point you want to tag on the right time bar, then click (tag) in the
lower-left corner. The recording type is alarm recording in this example.
Step 6 Set the name of the tag, then click Save.
---End
After the setting completes, you can search the recording file according to the tag name on the Tag
page.
To Next Page
Loading...
