Tenda MX15 Pro - Page 106

Document version: V1.0
96
Solution: You can configure the IPTV function to reach the goal.
Configuration procedure:
Step 1
Set your Mesh device.
1.
Log in to the web UI.
2.
Choose More > Network Settings > IPTV.
3.
Enable the STB function.
4.
Select the IPTV port for Ethernet Port Selection.
Ethernet Port 2 is used as an example here.
This substep is required only for MX15 Pro/EX15 Pro/Mesh15XP/MX21 Pro/EX21 Pro/Mesh21XEP.
5.
Click Save.
IPTV port