Tenda MX15 Pro - Guest Wi-Fi

Document version: V1.0
57
2.8.2 Guest Wi-Fi
Overview
In this module, you can enable or disable the guest network function and change the Wi-Fi name
and password of the guest network.
A guest network can be set up with a shared bandwidth limit for visitors to access the internet, and
is isolated from the main network. It protects the security of the main network and ensures the
bandwidth of your main network.
To access the configuration page, log in to the web UI of the Mesh device and navigate to More >
Guest WiFi. This function is disabled by default. The following figure shows the Guest WiFi page
with the Guest WiFi function enabled.
Parameter description
Parameter
Description
Guest WiFi
Used to enable or disable the guest network function.
2.4 GHz WiFi
Name
Specify the Wi-Fi name of the Mesh system's guest network. By default, Tenda_VIP is for
the 2.4 GHz Wi-Fi network and Tenda_VIP _5G is for the 5 GHz Wi-Fi network.
You can change the Wi-Fi names (SSIDs) as required. To distinguish the guest network
from the main network, you are recommended to set different Wi-Fi network names.
5 GHz WiFi
Name