---End
Verification:
You can download a network diagnosis App (HE.NET Network Tools for example here) on your
wireless client and ping an IPv6 website (240c::6666 for example) to check whether the Mesh
device accesses the IPv6 network successfully. As shown in the following figure, if the number of
packets received is not 0, the Mesh device accesses the IPv6 network successfully.
If the IPv6 network fails, try the following solutions:
-
Ensure that devices connected to Mesh device obtain their IPv6 addresses through
PPPoEv6.
−
Consult your ISP for help.
To Next Page
Loading...