◼
To perform wired networking:
Click Wired networking and follow the instructions displayed.
If the LED indicator of new node lights solid on and the new node is displayed in Network Topology,
the node is added successfully.
One-click optimization
To optimize the Wi-Fi network with one click:
Step 1
Log in to the web UI.
Step 2
Choose Network Status. Then, click under Network Topology.
Step 3
Click OK.
After you click OK, the Wi-Fi network is disabled and it takes some time for the
optimization process. Wait until the network is enabled again.
---End
Reboot all nodes
To reboot all nodes by one click:
Step 1
Log in to the web UI.
Step 2
Choose Network Status. Then, click under Network Topology.
Step 3
Click Reboot. Wait until all nodes are restarted.
---End
To Next Page
Loading...