2. Connect CPE1 to the computer.
Remove the cover of CPE1.
Use an Ethernet cable (CAT5e or better Ethernet cable is recommended) to connect the PoE/LAN1 port of CPE1 and the
PoE port of the PoE injector.
Use the power adapter to connect the PoE injector to a power source. The Power indicator lights up.
Use an Ethernet cable to connect the LAN port of the PoE injector to your computer. The PoE/LAN1 indicator of CPE1
lights up. (Under real conditions, you can also connect the LAN port of the PoE injector to a switch or a router)
To Next Page
Loading...