Tenda TX2 Pro - Router Hardware: Jacks, Ports, and Buttons; WPS;RST Button

LED indicator
Scenario
Status
Description
PPPoE user
name and
password
importing
Blinking green quickly
for 8 seconds
PPPoE user name and password imported
successfully
Resetting
Blinking orange
quickly
Resetting
Jack, ports and buttons
Jack/Port/Button
Description
WPS/RST
Used to start the WPS negotiation process, or to reset the router.
- WPS: Through the WPS negotiation, you can connect to the WiFi network of the
router without entering the password.
Method: Press the button, and the LED indicator blinks green fast. Within 2
minutes, enable the WPS function of the other WPS-supported device to
establish a WPS connection.
- Reset: When the router is working normally, hold the button down for about 8
seconds, and then release it when the LED indicator blinks orange fast. The
router is reset.