11N Wireless Broadband Router
38
¾ Select SSID ： Select the SSID (main SSID or
minor SSID) to configure security setting from the
drop-down menu.
¾ WPA Algorithms：Provides TKIP [Temporal Key
Integrity Protocol] or AES [Advanced Encryption
Standard]. The default is TKIP mode.
¾ Key Renewal Interval：Set the key’s renewal
period.
¾ Radius Server：Enter the IP address of the Radius
server.
¾ Radius Server port ： Enter the authentication
port of the Radius server. The default is 1812.
¾ Shared Secret ： Enter the shared key for
authentication server with 8~63 ASCII characters.
¾ Session Timeout： The authentication interval
period between AP and authentication server. The
default is 3600s.
6.2.6 802.1X
This security mode is used when a RADIUS server is
connected to the device. 802.1x, a kind of Port-based
authentication protocol, is an authentication type and
strategy for users. The port can be either a physic port
or logic port (such as VLAN). For wireless LAN users, a
port is just a channel. The final purpose of 802.11x
authentication is to check if the port can be used. If the
port is authenticated successfully, you can open this
To Next Page
Loading...
Need help?
General
