11N Wireless Broadband Router
61
the records will be also lost. The default setting is
disabled.
¾ Enable Email: To enable this feature, the URL
records will be sent to specified e-mail, which can
be solved the problem that the records will be lost
when it is over 500 entries.
¾ Receive E-mail Address: Input the received
E-mail’s address here. For example:
tenda@sina.com.cn
¾ SMTP Server Address: Input the SMTP server
address here. If you are not clear what your SMTP
server’s address is, you can find them from Help
page of the registered e-mail. For example:
smtp.sohu.com, smtp.163.com, etc.
¾ Send Email Address: Input the sending email
address here.
¾ User Name: Input the sending e-mail’s user
name.
¾ Email Password: Input the sending e-mail’s
password.
¾ Time Triggering Interval: To set se n ding
e-mail’s time interval. The time ranges from 30 to
1440 minutes. For example: if you input 30 here, it
means the Router will send a email from “Send
Email Address” to “Receive Email Address” in every
30 minutes. And then the device will clean all
records and start the recording again.
To Next Page
Loading...
