Wireless Network Adapter Users’ Guide
-28-
Note:
The Hex characters include numbers 0~9 and letters a-f.
ASCII characters include any Arabic digitals/letters and
characters.
1. Configure AP Mode
1˅First input the SSID which is easy to be identified by
you in the basic settings and keep other information
unchanged.
2 ˅ Select Ā WPA-PSK ā in the drop-down menu of
authentication type under security setting. Choose
ĀAESāas encryption type, input a key and click “Apply”.
3˅Other clients can have the following picture after their
scanned usable wireless networks are successfully
To Next Page
Loading...
