4.4.2 Profile Set Up for Ad Hoc Mode
By using ad hoc mode for communication, each PC must have a wireless
adapter for sharing resources. Setting up the Ad Hoc is easy. Simply follow
below instructions:
1. Configure a static IP address for each wireless adapter. All PCs on the Ad
Hoc network must be configured with static IP addresses manually. For
details, see appendix 1 hereof.
2. To add Ad Hoc profile:
a) Click Add and specify a SSID (wireless network name), say, "Tenda".
b) Select Ad Hoc as network type.
c) Select WEP and specify a WEP key.
d) Click Save .and you will find the profile in profile list.
e) Select it and click Connect.
To Next Page
Loading...
