Tenda W900U User Manual

150M 便携式 3G 无线路由器

Tenda W900U Specifications

General

Brand	Tenda
Model	W900U
Category	Adapter
Language	English

Summary

Chapter 1 Product Overview

1.5 Before Getting Started

Chapter 2 Installation Guide

2.1 Hardware Install

Details the physical steps for connecting the Tenda adapter to a computer via USB.

2.2 Software Install

Guides users through the process of installing the necessary drivers and software for the adapter.

Chapter 3 Use System Built-in Wireless Utility

3.1 Connect to a Wireless Network --Windows® XP

Explains how to connect to a wireless network using the built-in utility in Windows XP.

3.2 Connect to a Wireless Network --Windows® 7

Guides users on connecting to a wireless network using the native utility in Windows 7.

3.3 Connect to a Wireless Network --Windows® 8

Details the steps for connecting to a wireless network via the built-in utility in Windows 8.

Chapter 4 Tenda UI Guide

4.1 Frequency Band Setup

4.2 Wireless Connection

Explains how to view available networks and initiate a connection using the Tenda utility.

4.3 Wireless Status

4.4 Network Profile

4.4.1 Profile Set Up for Infrastructure Mode

4.4.2 Profile Set Up for Ad Hoc Mode

4.5 WPS Settings

4.5.1 To join a wireless network using WPS hardware button

4.5.2 To join a wireless network using WPS PBC or PIN from adapter's UI

Appendix 1 Config TCP/IP settings on your PC