Tenderflame Owners Manual / Fireplaces
10
Extinguishing
1. Place the extinguishing lid over the wick. The
flame will go out in a few seconds.
2. Leave the extinguishing lid on the burner until it cools.
Warnings
1. Never touch the glass or the burner while it is
in use. The glass can get very hot!
2. Let the burner cool for at least 5 minutes before relling to avoid steam.
3. Keep flammable liquids away from the flame.
4. If more than one burner is installed in a room, the room size
must be at least 15m multiplied by the number of burners.
5. Never move the burner while it is in use.
6. Do not place ceramic wood logs or other decorative elements directly
above the flames - this may cause the burner to overheat.
Troubleshooting
The burner fails to ignite: Ensure that the wick has
been moistened with fuel and try again.
The flame can't be extinguished: Take the extinguishing lid off and place
it over the wick again. Make sure that it covers the entire wick.
Maintenance
The replace does not require special maintenance beyond
regular cleaning. Use a damp cloth to wipe the burner
regularly. Clean the glass with a glass cleaning agent.
To Next Page
Loading...