TENNEY ENVIRONMENTAL
CHAMBER OPERATION
/.
)
To operate the chamber, turn on the power source to the chamber and close all chamber
circuit breakers. The display of the Watlow
942
should now be illuminated. Enter the desired
temperature program or manual setpoints as explained in the Watlow
942
user's manual.
Close the Power On switch
1SS. The green ON light should be illuminated.
If your chamber includes the optional Watlow
93
Controller with TempGard IV feature, set this
controller's
highnow temperature limits at this time. Refer to the "Alarm And Shutdown Circuit"
description and the "TempGard
IV Configuration And Use Instructions" for further details.
For those chambers which include any other options, please refer to the appropriate "optional"
manual sections for
a
detailed operation description.
IMPORTANT
NOTE1 For complete programming and/or operating instructions on any of the
controllers, electrical
I
mechanical components, or optional equipment, you must refer to their
operating manuals included with your Tenney Environmental manual.
To Next Page
Loading...
