Need help?Do you have a question about the Tens EV-806P and is the answer not in the manual?
General| Pulse Amplitude | 0-100 mA |
|---|---|
| Pulse Rate | 2-150 Hz |
| Type | TENS |
| Channels | Dual |
| Pulse Width | 50 us - 300 us |
| Intensity Levels | 20 |
| Battery | 9V |
Details on opening the front cover to access device controls for TENS/EMS functions.
Guides on switching on the device and selecting TENS or EMS programs.
Procedure for connecting patient leads to the device and electrodes.
Explains Mode, Set, Increment, Decrement controls, Timer, and Low Battery Indicator functions.
Steps to adjust intensity, select modes (B, N, M, SD1, SD2), and set pulse width for TENS.
Guides on setting pulse rate (2-150Hz) and treatment timer (1-60 mins or Continuous).
Steps to set intensity and select EMS modes (S, A), including ramp time adjustment.
Details on setting 'On Time' for stimulation and 'Off Time' for relaxation in EMS modes.
Instructions for setting pulse width, pulse rate, and timer for EMS treatments.
Crucial safety precautions for using TENS devices, including contraindications and warnings.
Cautions for using EMS, especially for pregnant patients, those with heart issues, or epilepsy.
Specific patient conditions where electrical stimulators should not be used, e.g., pacemakers.
Lists warnings regarding long-term effects, specific body areas, and potential risks.
Checklist for device safety before use and troubleshooting common malfunctions.
Advice on adjusting intensity to a comfortable, perceptible level without discomfort.
Details TENS programs P01-P06, including frequency and pulse width for various conditions.
Details TENS programs P07-P12, including frequency and pulse width for various conditions.
To Next Page
