The order of the following assembly instructions will depend on your personal preferences
for using the TentBox Cargo, as the parts all use the same accessory rails. Your TentBox,
your way!
Attaching the handle to your TentBox Cargo
You can attach the handle wherever you like, it helps to pull the TentBox closed when
buckling it up.
• Using the small bolts, in combination with the small metal plates, you can slide the
handle along the top accessory rail, on any part of your TentBox.
• Tighten it securely in place, using the Allen keys provided.
Attaching the closing buckles to your TentBox Cargo
You will need to attach both the closing buckle itself as well as the latch that the buckle
attaches to.
• Using the small bolts, in combination with the small metal plates, you can slide the
latch along the top accessory rail, and tighten it in place using the Allen keys
provided.
• Do the same thing with the buckle, but along the bottom accessory rail. Make sure to
line it up with the latch which you attached in step 1.
To Next Page
Loading...
