Need help?Do you have a question about the TentBox LITE and is the answer not in the manual?
Securely attach the two fixing rails to the base of your TentBox for mounting to a vehicle.
Attach the ladder to the TentBox Lite using the provided brackets and parts for permanent fixture.
Steps to open the TentBox, including using the ladder for leverage and setting up tent poles.
Instructions on how to extend and collapse the ladder safely for use with the TentBox.
Detailed steps for closing the TentBox, ensuring sides are tucked, straps are tightened, and cover is fitted.
Instructions for lifting and securely fixing the TentBox to vehicle roof bars at four points.
Advice on reducing condensation and preventing mould by improving ventilation.
Recommendation to reproof the canvas material annually for maintained waterproofness.
Guidance on storing the TentBox on the vehicle year-round or in a dry indoor location.
Details about the 24-month warranty, coverage, and conditions for voiding it.
This document serves as a user guide for the TentBox Lite, a roof-mounted tent designed for vehicle-based adventures. It provides comprehensive instructions on assembly, usage, mounting, and maintenance, ensuring users can safely and effectively utilize their TentBox Lite. The guide emphasizes the importance of understanding all instructions before attempting to mount or use the device, highlighting safety as a primary concern.
The TentBox Lite is a portable, foldable tent system that attaches to the roof bars of a vehicle, providing an elevated sleeping and living space for outdoor enthusiasts. Its primary function is to offer a convenient and comfortable shelter solution for camping and travel, allowing users to set up camp quickly and easily wherever their vehicle can go. The design incorporates features that facilitate rapid deployment and packing, making it suitable for spontaneous trips and extended journeys alike. The TentBox Lite is engineered to withstand various weather conditions, offering protection from the elements and a secure environment for occupants. It transforms a standard vehicle into a mobile base camp, enhancing the outdoor experience by providing a readily available and comfortable sleeping area.
The TentBox Lite offers a range of features designed to enhance its usability and convenience.
Assembly and Installation: The guide details a step-by-step process for assembling the TentBox Lite. This includes attaching the two fixing rails to the base of the TentBox, which are crucial for mounting it to a vehicle. Users slide bolts along the rails, drop them through pre-drilled holes, and secure them with washers and nuts from inside the TentBox, underneath the mattress. The guide advises tightening these rails securely using four washers and four nuts. It also provides guidance on positioning the rails based on how the user wants the TentBox to fold open – either over the side or towards the rear of the vehicle.
Attaching the ladder is another key assembly step. The ladder mounts are secured in a similar fashion to the fixing rails, using pre-drilled holes and parts provided. The ladder itself then attaches to these mounts using nuts and washers, and it is designed to remain permanently attached, eliminating the need for removal during packing. The guide stresses the importance of tightening all nuts securely during both rail and ladder mount installation.
Opening the TentBox: The process of opening the TentBox Lite is designed for simplicity. First, the PVC cover is removed, and the velcro straps are undone. The TentBox is then folded out, with the ladder used as leverage to assist in the unfolding process. Once unfolded, the ladder is extended to the correct height. It's crucial to ensure the ladder is not at too steep an angle to avoid unnecessary strain. The ladder provides extra support for the fold-out section of the TentBox and must remain in place while occupied. A critical safety check involves ensuring the hinge is correctly engaged before anyone climbs inside.
The TentBox Lite comes with eight tent poles used to prop open the rain covers for the windows and doors. These poles are essential for the full set-up. They are slotted into holes around the base of the TentBox and then bent up to hook into metal eyelets on the tent fabric.
Using the Ladder: The ladder is extendable by pulling it outwards. To collapse it, users push black buttons inwards, with a caution to be mindful of fingers as it can drop suddenly.
Closing the TentBox: Packing away the TentBox Lite involves reversing the opening steps. All tent poles are removed first. The TentBox is then folded closed, again using the ladder. The ladder's height should be reduced so it sits flush with the edge of the TentBox, but not fully closed, to make it easier to open next time. It's important to ensure the sides of the tent fabric are thoroughly tucked in to allow the PVC cover to fit properly. Finally, the velcro straps are tightened, the PVC cover is applied and securely velcroed down, and the two outer velcro straps are fastened to ensure the TentBox is secure for travel.
Mounting to a Vehicle: Mounting the TentBox Lite to roof bars requires the assistance of another person to carefully lift and centrally position it. The TentBox is then fixed at four corners using specific fixing parts. This involves attaching a plate to a t-shaped bolt with a nut, sliding the bolt onto the fixing rail, and positioning one bolt on either side of the roof bar with the plate acting as a clamp underneath. A larger plate is then tightened to the hanging bolts using nuts, securely fastening the TentBox to the roof bar. These steps are repeated at all four corners to create four secure fixing clamps. The guide emphasizes tightening all nuts adequately to ensure the TentBox is secure.
Proper maintenance is crucial for the longevity and performance of the TentBox Lite.
Condensation and Mould Prevention: The guide acknowledges that condensation and dampness can occur in enclosed spaces. To mitigate this, users are advised to leave windows slightly open while sleeping to improve ventilation. If this is not possible due to cold weather, airing out the TentBox before closing it is recommended. If condensation has built up, the TentBox should be opened up as soon as possible, ideally within 24 hours, to allow it to dry completely. Before storing the TentBox for longer than 24 hours, it must be completely dry, both inside and out.
Re-waterproofing: To maintain 100% waterproofness, the exterior canvas material of the TentBox can be reproofed annually with any standard canvas re-proofer. The exterior rainfly does not require reproofing.
Storage: The TentBox Lite is designed to withstand all weathers and can be kept on the vehicle year-round. However, if users prefer to remove it, especially during winter or periods of non-use, it should be stored indoors in a dry place. For space-saving, it can be stored on its side, with the recommendation to place protective matting underneath to prevent scratching.
Safety Checks: Regular safety checks are highlighted as a key aspect of maintenance. Users must ensure their roof bars are installed safely and securely according to the manufacturer's instructions, and that the TentBox itself is installed safely and securely as per the provided fitting instructions. Before every journey and at regular intervals during travel, users should check that the TentBox is firmly fixed to the roof bars, that all locking straps are securely fastened, and that the roof bars are secure to the vehicle. These checks should only be performed in a safe and suitable location. It's also important to regularly check that none of the TentBox components or roof bars are damaged. The guide advises against using the TentBox if there is any visible damage and to contact support in such cases.
Cleaning: Users are warned not to use bleach, alcohol, or ammonia-based cleaning liquids on their TentBox, as these can damage its surface.
Ladder Maintenance: The guide reminds users to ensure the ladder hooks are in good condition and to contact support if replacements are needed.
The TentBox Lite user guide is a comprehensive resource designed to ensure a safe, enjoyable, and long-lasting experience with the product. It covers all essential aspects from initial setup to ongoing care, with a strong emphasis on user safety and proper handling.
General| Type | Roof Tent |
|---|---|
| Weight | 50 kg |
| Setup Time | 5 minutes |
| Waterproof Rating | 3000mm |
| Color Options | Grey |
| Capacity | 2 people |
| Internal Size | 120cm x 240cm |
| Mattress | 6cm high-density foam |
| Ladder | Telescopic |
| Ventilation | Mesh windows |
| Seasons | 3 seasons |
| Installation | Requires roof bars |
To Next Page
