TentBox LITE - Closing Your TentBox

Step 1: Remove all of the tent poles
Step 2: Fold the TentBox closed, using the ladder. Reduce the height of the ladder, so
that it sits flush with the edge of your TentBox. Do not close the ladder all the way,
otherwise it will be hard to open it again next time.
Step 3: Ensure the sides are tucked in thoroughly, otherwise the PVC cover will not fit
properly.
Step 4: Tighten the velcro straps, apply the PVC cover, making sure that it is properly
velcroed down.
Step 5: Apply the two outer velcro straps, to ensure that your TentBox is secure and
ready for the road.
Closing your TentBox