Step 1: Slide the bolts along the rails, and drop them through the pre-drilled holes in
the
base of your TentBox.
Step 2: To secure the rails in place, you apply washers and nuts to the bolts, from the
inside of your TentBox (underneath the mattress).
ⓘ
Make sure to tighten the rails securely using 4x washers and 4x nuts in total.
ⓘ
If you want your TentBox to fold open over the side of your vehicle, position the
rails parallel to the opening hinge. If you want your TentBox to fold open towards the
rear of your vehicle, position the rails perpendicular to the opening hinge.
How to assemble your TentBox
You will need to attach several parts to your TentBox Lite, before it is ready to use. Our
installation videos give a much clearer explanation of this process.
Attaching your Fixing Rails
You will need to securely attach the two fixing rails to the base of your TentBox, in
order to mount it to your vehicle.
To Next Page
Loading...
