Step 1: Fix one cross bar mounting bracket to each end of the two cross bars, using
the small bolts provided, and the small metal plates which are inside the bar itself.
Step 2: Adjust the brackets on the bars, so they are the correct distance apart to fit
snugly over the top of your TentBox.
Step 3: Using the small bolts, in combination with the small metal plates, you can
slide the cross bar brackets along the top accessory rail of your TentBox, and tighten
them in place.
ⓘ
Make sure to tighten the cross bars to the brackets, as well as the brackets to the
TentBox securely. It is very important to make sure these are very tight, as they will
experience a lot of resistance when driving.
How to assemble your TentBox
You will need to attach several parts to your TentBox Cargo, before it is ready to use.
All of the attachments fit directly to the accessory rails on the outside edges. Our
installation videos give a much clearer explanation of this process.
Attaching the Cross Bars
To Next Page
Loading...
