TentBox Cargo - Attaching Closing Brackets

Step 1: Using the small bolts, in combination with the small metal plates, you can
slide the latch along the top accessory rail, and tighten it in place using the allen keys
provided.
Step 2: Do the same thing with the buckle, but along the bottom accessory rail. Make
sure to line it up with the latch which you attached in step 1.
Step 3: Do the same thing with your other latch and buckle, so that you have two
functioning closing buckles.
ⓘ Make sure to tighten the bolts securely using the provided allen key.
ⓘ You can position the two closing buckles on the rear of your TentBox, or have one
on each side. It will be easier to close the buckles if you position them along the
sides, as opposed to the rear, but it is down to personal preference. Your TentBox,
your way!
Attaching the closing brackets
You will need to attach both the closing buckle itself as well as the latch that the
buckle attaches to.