How to mount your TentBox
1. With the help of another person, carefully lift your TentBox onto your roof bars
and position centrally.
2. Fix the TentBox to your roof bars at 4 points (4 corners), using the fixing parts, as
shown below. Ensure that you tighten the nuts adequately, and that your TentBox is
secure.
Step 1: Drop a bolt through one of the smaller fixing plates.
Step 2: Slide this small plate along the rail on the underside of the TentBox, so that
the bolt drops down.
Step 3: Repeat Steps 1 & 2, so that you have a second bolt dropping down. Position
one bolt on either side of your roof bar.
Step 4: Using the nuts provided, tighten one of the larger plates onto the hanging
bolts, so that it is securely fastened to your roof bar. Ensure that you tighten the nuts
fully.
Step 5: Repeat the above steps at all 4 corners of your TentBox, so that you have 4
secure clamps between your TentBox and your roof bars.
To Next Page
Loading...
