pairing
adjusting
5.Connection Instructions
-When no connection is made after the speakerphones turned on, the speakerph-
one will automatically turn off after 10 minutes.
-When connected correctly, open any video software, and select the speakerpho-
ne as default audio device, then you can start the meeting.
-In the USB cascading mode, if the slave speakerphone turns off due to low pow-
er, you can connect it to computer or other terminal devices to charge, while it can
function as the master speakerphone. Meanwhile, the original master speakerph-
one will work as the new slave speakerphone.
To Next Page
Loading...