To Next Page
C
Cheryl StokesJul 25, 2025
Why won't my tepro ABINGTON burner ignite?
- SSamantha SmithJul 25, 2025
If the burner on your tepro Grill won’t ignite, here are a few things to check: * Make sure your LP gas bottle isn't empty; if it is, replace it with a full one. * A defective regulator could also be the culprit; have it tested or replaced. * Check for blockages in the burner, gas nozzles, or gas hose, and clean them if necessary. * Also, ensure the electrode cable is properly connected to the electrode or ignition unit. If the electrode or cable is defective, consider replacing them. Finally, the ignition switch itself might be defective, requiring replacement.
General
