39
Step 19
Setting up the BBQ
Attention Risk of damage!
During use, the screws can
loosen slowly and impair the
BBQ’s stability.
– Check the stability of the screws prior
to each use. If necessary, tighten all of
the screws again to ensure the BBQ is
standing securely.
– When using the grill, please protect the
floor and surrounding walls from possib-
le soiling e.g. through fat splashes.
• Before use, place the BBQ on an even,
sturdy surface outdoors.
Before grilling
• Prior to first use, wash the cooking grid
and the warming grille with warm soa-
py water.
• Pre-firing
Before you use the BBQ for the first
time, it needs to be conditioned (pre-
fired) for at least 1-2 hours at a tempe-
rature of 100 °C- 200 °C.
This is necessary in order to make the
inside ready for barbecuing and to burn
in the heat-resistant paint on the out-
side. During the pre-firing, the cover
should not be completely closed. Only
close the cover completely for a few
minutes at the end.
Attention: During the pre-firing, the
temperature must not exceed 260 °C.
Important:
All screws must be tightly fastened.
P180174-TEPRO_1162_Toronto_Kompakt_DE_GB_20180904.indd 39 4/9/2018 5:11 PM
To Next Page
Loading...
