Ter Welding Smart Welder MMA 200 - User Manual

25 pages

Save Page as PDF

To Next Page

To Next Page

Loading...

USER'S MANUAL

MMA SERIES WELDING MACHINE

SMART WELDER MMA 140-160-170-

180-200

Table of Contents

Questions and Answers

E
Eric PattersonAug 8, 2025
What to do if the Ter Welding Welding System shows abnormal indicator lights?
- Q
  qflynnAug 8, 2025
  If your Ter Welding Welding System displays abnormal indicator lights, it could be due to over-current protection. Try turning off the power switch and restarting the machine after the abnormal indicator light has winked. Alternatively, it might be overheating protection; in this case, wait for about 2-3 minutes until the machine restarts without turning off the power switch.
P
pandrewsAug 18, 2025
What to do if the Ter Welding Welding System meter shows, the fan works, but there is no welding output?
- R
  Richard EvansAug 18, 2025
  If your Ter Welding Welding System's meter is displaying information and the fan is working, but there's no welding output, first, ensure all sockets in the machine are properly connected. Then, check for any open circuits or poor connections at the output terminal joints. Also, inspect the torch's control cable for breaks or switch damage.
V
Victor RiversAug 28, 2025
How to troubleshoot Ter Welding Welding System when the meter shows nothing, the fan doesn't rotate, and there's no welding output?
- M
  Michael WaltonAug 28, 2025
  If your Ter Welding Welding System's meter displays nothing, the fan isn't rotating, and there's no welding output, start by confirming that the power switch is turned on. Next, ensure that the input cable has a power supply. Also, check if the silicon bridge is damaged.

Summary

Declaration of Conformity

Safety Warnings

General Safety Precautions

Lists essential safety warnings and precautions for operating the welding machine.

Hazard Prevention

Crucial instructions to avoid accidents, electric shock, fire, and explosions.

Health and Equipment Safeguards

Details health hazards and safety for gas cylinders, switches, and moving parts.

Electromagnetic Interference Management

Addresses potential electromagnetic interference and necessary preventive measures.

Product Overview and Specifications

General Product Description

Overview of the MMA series welding machine and its advanced inversion technology.

Technical Data for MMA Series

Detailed technical specifications for MMA140, MMA160, MMA170, MMA180, and MMA200 models.

Installation Guide

Installation Procedures and Requirements

Step-by-step guide for installation, including cable, ventilation, and grounding.

Operation and Usage

Panel Layout and Controls

Description of front and back panel controls and indicators for different machine types.

Operation, Environment, and Troubleshooting

Instructions for operation, welding environment, and common welding problems and resolutions.

Maintenance and Fault Finding

Routine Maintenance and Inspection

Outlines daily maintenance tasks and an inspection checklist for optimal performance.

Malfunction Identification and Solutions

Lists common malfunctions and their corresponding solutions for the welding machine.

Technical Diagrams

Welding Machine Circuit Diagrams

Provides circuit diagrams for MMA 140/160 and MMA 170/180/200 models.

Ter Welding Smart Welder MMA 200 Specifications

General

Brand	Ter Welding
Model	Smart Welder MMA 200
Category	Welding System
Language	English

Related product manuals

Ter Welding Smart Welder MMA 140

Preview: Ter Welding Multi Synergic 250

Ter Welding Multi Synergic 250

Ter Welding Multi 250K

Ter Welding Multi 400K

Ter Welding Multi 250