Need help?Do you have a question about the Ter Welding Multi 400K and is the answer not in the manual?
TER SRL declares machines comply with relevant EU directives and harmonized standards for professional use.
Covers electrical, health, fire, burn, noise, pacemaker, and explosion risks for safe operation.
Explains PLC current control and standby power saving mode for efficient operation.
Details the VRD feature that reduces no-load voltage to enhance operator safety.
Details alarms for power supply issues, short circuits, output failures, and thermal conditions.
Explains thermal alarms and water circulation failure (AL H2O) with troubleshooting steps.
Explains how to adjust Hot Start values in both manual and synergic MMA modes.
Covers TIG torch connection, gas setup, Lift-Arc, and various trigger modes.
Details pre-set synergic TIG parameters and how to adjust slope down, pulsation, and post-gas.
Explains Twin MIG mode, frequency settings, and special SPC/UP functions for MULTI PLUS.
Details Twin MIG mode selection and parameter adjustments using the external wire feeder control panel.
Provides a comprehensive list of display messages, alarm types, and recommended checks.
General| Brand | Ter Welding |
|---|---|
| Model | Multi 400K |
| Category | Welding System |
| Language | English |
To Next Page
