TD2303-08EN YTxx2 27
4.1.3 Trailer brake valve (optional)(2A)
If the trailer brake control is in the upper position (the trailer brakes
are not applied), the trailer brakes can be applied gradually by
moving the lever downwards.
4.1.4 Gear lever (3)
See the (automatic) transmission manual for instructions.
Always maintain the engine at a comfortable operating speed by
selecting the correct gear for the driving conditions. When
maximum engine performance is required, ensure the engine is
operating as close as possible to its maximum (governed) speed
under load.
Shifting from forward (1,2,3,D) to reverse and reverse to forward or shifting out of neutral position is
only allowed when the tractor is standing completely still and the engine is running idle.
To Next Page
Loading...
Need help?
General
