Terex TA30 - Engine - Engine and Mounting; Engine; Engine and Mounting

Section 110-0030
1
SM 1964 4-00
SM - 2479
ENGINE - Engine and Mounting
1 - Engine
2 - Fan Belt
3 - Alternator Belt
4 - Lube Oil Filter
5 - Coolant Filter
6 - Fuel Filter
7 - Front Mounting Bracket
8 - Rear Mounting Bracket
9 - Rubber Mount
10 - Snubbing Washer
Fig. 1 - Engine and Mounting
DESCRIPTION
Numbers in parentheses refer to Fig. 1.
For engine make, model and specification, refer to
Section 000-0000, GENERAL INFORMATION. For
engine servicing and repair data refer to the engine
manufacturers service manual.
The engine is supported by front mounting bracket (7)
and two rear mounting brackets (8) which are bolted to
the engine and attached to the tractor frame through
rubber mounts (9). Rubber mounts (9) provide
sufficient flexibility to absorb varying engine vibration
and torsional loads.
Lube oil filter (4) and coolant filter (5) are mounted on
the right hand side of engine (1) and fuel filter (6) is
mounted on the left hand side.
11 - Bolt
12 - Bolt
13 - Locknut
14 - Bolt
15 - Lockwasher
16 - Bolt
17 - Lockwasher
18 - Bracket
19 - Cover
20 - Bolt
21 - Bolt
22 - Bolt
23 - Lockwasher
24 - Plate Friction
25 - Flexible Element
26 - Radial Bearing
27 - Axial Bearing
28 - Flange
29 - Hub Flanged
30 - Fan
31 - Bolt
32 - Washer
33 - Drive Clutch Fan
34 - Hose
35 - Valve Sensor
36 - Bolt
37 - Locknut
38 - P-Clip
39 - Radiator Support
Bracket
5
6
4
ENGINE - LHS
1
3
2
32
31
33
34
35
16
11
7
9
10
13
8
15
14
11
9
10
17
12
17
13
RAD. WATER PIPE
37
18
36
38
30
39
21
23
20
23
24
29
28
25
26
27
19
22
23
Courtesy of Machine.Market