8-28-2
SAFETY PRECAUTIONSSAFETY PRECAUTIONS
Do not allow unauthorized personnel to service or maintain this truck. Study theDo not allow unauthorized personnel to service or maintain this truck. Study the
Operator’s Handbook and Maintenance Manual before starting, operating orOperator’s Handbook and Maintenance Manual before starting, operating or
servicing this truck. Always follow procedures and safety precautions detailed in theservicing this truck. Always follow procedures and safety precautions detailed in the
Service Manual.Service Manual.
Always attach a 'DO NOT OPERATE' or similar warning sign to ignition switch or aAlways attach a 'DO NOT OPERATE' or similar warning sign to ignition switch or a
control before cleaning, lubricating or servicing the truck.control before cleaning, lubricating or servicing the truck.
Never allow anyone to work on the truck while it is moving. Make sure no one is onNever allow anyone to work on the truck while it is moving. Make sure no one is on
the truck before working on it.the truck before working on it.
Do not work under or near an unblocked or unsupported body. Do not work under or near an unblocked or unsupported body. Always use the bodyAlways use the body
safety pins.safety pins.
Do not work under or near any unblocked or unsupported linkage, part or truck.Do not work under or near any unblocked or unsupported linkage, part or truck.
Always relieve pressure before servicing any pressurized system. Follow theAlways relieve pressure before servicing any pressurized system. Follow the
procedures and safety precautions detailed in the Maintenance Manual.procedures and safety precautions detailed in the Maintenance Manual.
Always shut down the engine according to Always shut down the engine according to the procedure under 'Stopping Thethe procedure under 'Stopping The
Engine', described on page 4-14, before cleaning, lubricating or servicing theEngine', described on page 4-14, before cleaning, lubricating or servicing the
truck, except as called for in this Handbook or the Maintenance Manual.truck, except as called for in this Handbook or the Maintenance Manual.
When changing oil in the engine, transmission and hydraulic systems, orWhen changing oil in the engine, transmission and hydraulic systems, or
removing hydraulic lines, remember that the oil may be hot and can cause burnsremoving hydraulic lines, remember that the oil may be hot and can cause burns
to unprotected skin.to unprotected skin.
When working on or around exhaust components, remember that theWhen working on or around exhaust components, remember that the
components may be hot and can cause burns to unprotected skin.components may be hot and can cause burns to unprotected skin.
Always deflate the tyre before attempting to remove any embedded objects orAlways deflate the tyre before attempting to remove any embedded objects or
removing the tyre and rim assembly from the truck.removing the tyre and rim assembly from the truck.
Always use a self-attaching chuck with a long airline, and, stand to one side whileAlways use a self-attaching chuck with a long airline, and, stand to one side while
the tyre is inflating. Refer to Section 160-0050 in the tyre is inflating. Refer to Section 160-0050 in the Maintenance Manual.the Maintenance Manual.
To Next Page
Loading...
