7
Installation
STEP 9
CAREFULLY LOCATE THE RADIO BACK INTO POSITION. MAKE SURE
THAT THE HARNESS DOES NOT BLOCK THE RADIO UNIT OR GET CRIMPED
BY THE RADIO WHEN INSTALLING. REPLACE AND TIGHTEN THE RADIO
MOUNTING SCREWS. REPLACE THE TRIM BEZEL .
STEP 10
LOCATE AND INSTALL THE MAGNETIC MOUNT ANTENNA (A1) PER THE
INSTRUCTIONS SHOWN IN THE XM DIRECT INSTALLATION GUIDE
(XM-RVR-D-001). THE IMAGES BELOW SHOW THE ANTENNA MOUNTED
ON THE ROOF NEAR THE FRONT WINDOW.
STEP 11
ROUTE CABLE ACCORDINGLY TO THE LOCATION OF THE XM TUNER (A2).
Smart Digital Adapter
To Next Page
Loading...