8
Installation
STEP 12
AT THIS POINT OF THE INSTALLATION THE RED AND WHITE RCA CABLE,
THE 8 PIN MINI DIN CABLE AND THE XM ANTENNA CABLE SHOULD ALL
BE ROUTED TO THE INTENDED LOCATION OF THE XM TUNER (A2).
CONNECT THESE CABLES TO THE UNIVERSAL TUNNER BOX (A2).
STEP 13
LOCATE THE XM TUNER (A2) INTO ITS FINAL MOUNTING POSITION AND
SECURE IN PLACE WITH AN APPROPRIATE METHOD TO PREVENT
MOVEMENT AND RATTLING.
STEP 14
IF THE GLOVE COMPARTMENT DOOR OR ANY OTHER PART OF THE DASH
BOARD HAD BEEN REMOVED PLEASE RETURN IT TO ITS ORIGINAL
POSITION. YOUR INSTALLATION IS NOW COMPLETE. YOU MUST NOW
ACTIVATE YOUR XM TUNER.
Smart Digital Adapter
To Next Page
Loading...