TERMA MOA - REG 3 Model Information; REG 3 Indicators and Emergencies

26
User manual MEG, DRY, MOA, REG 2, REG 3
REG 3
When the device is turned on, it heats the
radiator up to the set temperature. Having
reached that temperature, the device will
turn on and o regularly in order to main-
tain it.
50° 65°
The construcon of the device as well as
the physical characteriscs of the heang
agent inside the radiator, inuence the way
in which the heat is distributed — the tem-
perature of the boom pipes on the radia-
tor (especially the two located at the very
boom of the radiator) may be lower than
the temperature of the remaining parts of
the radiator — this is a normal phenomenon.
Emergency situaons
Should you discover any abnormalies in the
way the device is operang, please check if:
• The device is correctly connected to the
installaon.
• The radiator is correctly lled with the
appropriate heang agent.
If the heang element unit is sll not work-
ing correctly, it should be uninstalled and re-
turned to the supplier.
Temperature regulaon ring with
temperature seng indicators: