TERMA MOA - REG 2 Model Information; REG 2 Operation and Emergencies

25
EN
REG 2
Aer the device is turned on, it heats the
radiator up to 65° C. Having reached that
temperature, the device will turn on and
o regularly in order to maintain it.
The basic version of the device is not ed
with the on/o switch on the casing — it can
be turned on/o by plugging it into a mains
electricity socket (or connected permanent-
ly to the electricity circuit). A shining ring in-
dicates that the device is connected to the
electricity circuit.
Version +W of the device (not available in
the UK) is addionally ed with the on/
o switch on the plug. The construcon of
the device as well as the physical character-
iscs of the heang agent inside the radi-
ator inuence the way in which the heat is
distributed — the temperature of the bot-
tom pipes on the radiator (especially the
two located at the very boom of the radi-
ator) may be lower than the temperature of
the remaining parts of the radiator — this
is a normal phenomenon.
Emergency situaons
Should you discover any abnormalies in the
way the device is operang, please check if:
• The device is correctly connected to the
installaon.
• The radiator is correctly lled with the
appropriate heang agent.
If the heang element unit is sll not work-
ing correctly, it should be uninstalled and re-
turned to the Supplier/Seller.
Ring indicang that the
device is operang