Push Button Functions
A. Power Push Button
B. Adjustable Humidity Push Button
C. Timer Push Button
D. Fan Speed Push Button
OPERATING INSTRUCTIONS
1. The Power indication light will turn on in green when the unit is plugged in,
Regardless of whether the unit is operating or not.
2. Press button once to start operation. Press it again to stop operation.
3.press button as follows：
Press to set the desired fan speed. It can be adjusted between high speed and low speed.
4. Press button to set the desired humidity level in the room, which can be set from 40% to 80% at 5% intervals.
After a period of working, when environment humidity is lower than the selected humidity by 2%, compressor will stop
and fan stops working 3 minutes later; When environment humidity is equal to or higher than the selected humidity by 2%,
compressor will restart once 3-minutes compressor protection time over.
5.press button can be timer setting：
Press the button to program the time when the unit turns on and turns off. If you want to cancel the timer programming,
press the button to adjust the time at 00, and press the button ,it will be circulate from 00-01-02……23-24.It is the
programmed time to switch the machine. The programmed time will be cancelled when to switch compressor manually
each time. The programmed time remains unchanged if the machine stops to wok due to water full or during defrosting
To Next Page
Loading...