ENGLISH
• Fill the tank with water.
• Through the steam adjustment command (4) choose the desired steam supply (see
chart A).
NOTE:
• When the iron is placed vertically during the ironing pauses the steam supply is
automatically cut off.
• When
steam. This is to be considered normal. Before ironing you clothing do some tests
on an old cloth.
• Put the steam adjustment command (4) in position of dry ironing.
DRY IRONING
• Push several the super-steam button (5): the iron will supply an instantaneous high
power steam jet.
NOTE:
• Don’t consecutively push the button too many times to avoid coming of non steamed
SUPER-STEAM FUNCTION
• Check that the steam adjustment command (4) is in the position of dry ironing (see
chart A).
• Completely unroll the power cord (7), put the iron in a vertical position and connect
the plug to the current socket.
• With the temperature adjustment knob (9) select the temperature suitable for the
type of fabric to iron (see chart B).
• Thermostat indicator (8) switches on and will switch off when the plate has reached
the selected temperature. At this point the iron is ready for use.
ADVICE:
• Iron
ones which require higher temperature;
• Before starting with ironing pass the iron over a small internal area of your item of
clothing to make sure that the selected temperature is suitable for that type of fabric.
OPERATING INSTRUCTIONS
STEAM IRONING
SPRAY FUNCTION
• This function allows to wet the clothing during both steam and dry ironing.
• To activate it push several time the spray button (6) e direct the water jet onto the
most resistant creases.
To Next Page
