Tern Transporteur Rack

To Next Page

Transporteur Rack

Weight Limit

Do not exceed 20 kg (44 lb).

Safety

Do not move your GSD by the Transporteur Rack.

Secure all cargo before riding. Take care that all straps are tied down and any loose item is secured.

Installation

Tools required (not included)

5 mm Allen Wrench

10 mm Open-End Wrench

1. Fit the Rack onto mount and insert Bolts, Washers, and Nuts, as shown above.

2. Tighten Bolts to a torque of 10 Nm – 12 Nm.

3. Secure the Cables with the Cable Strap.

Check that cables and cargo do not interfere with steering and/or braking

before riding.

Make sure the Cable Strap location does not interfere with Physis

handlepost operation.

What’s Included

1. Transporteur Rack

2. Bolt Set x 2

M6 x 50 mm

M6 Washer

M6 Nut

3. SideStrap x 1

4. Cable Strap x 1

5 mm

10 mm

ternbicycles.com

Need help?

Do you have a question about the Tern Transporteur Rack and is the answer not in the manual?

Summary

Whats Included

Weight Limit

Safety

General Safety Precautions

Do not move GSD by rack. Secure all cargo and loose items before riding.

Installation

Rack Mounting and Fastening

Fit rack onto mount, insert bolts/washers, and tighten to 10-12 Nm torque.

Cable Securing and Safety Checks

Secure cables with strap and check for interference with steering, braking, or handlepost.

How to Install a Bottle Cage and;or Lock

Bottle Cage;Lock Mounting Procedure

Remove old bolts, position accessory, and tighten new bolts to 4-5 Nm torque.