42
Start-up
Unpacking and checking the contents of
the shipment
You should retain the original appliance
packaging for any future transportation.
• Unpack all components.
Check the contents of the packaging for
any transportation damage.
• Check whether the shipment corre
sponds to the details on the delivery
docket.
• Inform your specialised TERRA dealer
immediately should you detect any
transportation damage or discrepancies
between the packaging contents and
delivery docket.
Initial start-up
It takes only a few steps to start up your
appliance for the rst time:
• Select a location for the appliance and
set up the appliance.
• Check the rated voltage and then connect
the appliance to the mains power supply.
• Switch on the appliance.
External devices
If you have also received other devices in
addition to your appliance (e.g. a printer),
these should only be connected following
initial installation. The manner in which
these external devices are connected is
described in the following sections.
i
To Next Page
Loading...