Activating the screen and appliance
Switching on the device
• Devices with On/Off switch:
Set the On/Off switch at the rear of the
device to the “I” position (1).
• Push the standby switch on the front of
the device (2).
• The power indicator illuminates, the
device is activated.
Switching off the device
• Shut down your operating system in the
correct manner.
• The operating system shuts down your
device and switches it off.
• In the event of the system
unexpectedly failing to deactivate
automatically, press and hold the
standby switch for at least 4 seconds.
Should you need to shut down the
device repeatedly in this manner, please
have it checked by a specialised dealer!
The standby switch does not disconnect
the device from the mains power supply.
The mains plug should be pulled out of the
socket to disconnect completely from the
mains power supply.
• Switch off the monitor if necessary (see
monitor operating manual).
* On/Off switch depends on
appliance
1.
2.
To Next Page
Loading...